LCS TESTING LAB

Cell CB certification to IEC 62133-2

IECEE CB / IEC 62133-2 / forced internal short circuit

Cell CB certification to IEC 62133-2

A CB certificate is the IECEE mutual-recognition document: one test campaign and one certificate convert into national approvals across more than 50 member countries. Lithium battery projects certify to IEC 62133-2 with an NCB and an accepted laboratory; most customers in international schemes use it to convert to KC, BIS, BSMI, RCM or UL. Certifying the cell separately and letting the pack reference the cell certificate is the most economical route.

Key point: Confirm the destination market, how the report will be used and the shipping or customs milestone first; one report usually serves several markets, with national differences scoped separately.
Lead time
15–20 working days
Sample quantity
2–3 units
Test items
6 items
Deliverables
Reports + declarations
STANDARDS

Regulations and standards

Regulation / directive / standardStandardsScope
IEC 62133-2:2017 + AMD1:2021Cell safetyCells and packs certified separately; the pack certificate references the cell certificate
Forced internal short circuit (annex to IEC 62133-2)Crush-triggered internal shortOften additionally required for Japan and Korea; plan dedicated samples
CB certificate and test reportNCB issuance with CBTL testingThe certificate number is verifiable on the IECEE site; submit both when converting
Convertible marketsKC / BIS / BSMI / RCM / UL / GS and moreNational differences are added, usually limited to local difference testing
Validity and upkeepLong-term validity; a standard revision triggers re-assessmentWhen an amendment takes effect, testing to the new edition is required
TESTS

Main test items

Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.

01
Cell continuous low-rate charging and forced discharge
02
Cell external short circuit at ambient and 55 °C
03
Cell crush, impact, drop, thermal abuse and low pressure
04
Forced internal short circuit where Japan or Korea conversion is planned
05
Pack overcharge protection and external short circuit
06
Marking and manual review required by the CB report
Not sure which of the 6 test items apply to your model? Send the datasheet, rating-label photo and where the report will be used — an engineer replies within 24 hours with the applicable item list and a schedule. Talk to an engineer →
SAMPLES

Samples and documents

  • 10 cells, plus 10 more for the internal-short item
  • Cell datasheet, BOM, separator and electrolyte details
  • Factory ISO 9001 certificate
  • List of target conversion countries
LEAD TIME

Lead time and deliverables

15–20 working days to complete testing and issue the CB certificate; the internal-short item adds 5–8 working days.

IECEE CB certificate, CB test report and a conversion-difference list.

For shipping or tender deadlines we can run safety first and follow with EMC and efficiency in a second batch; for an updated model in the same series an existing report can be reused with only the differences retested.
Request a quote and plan

Inquiry / Request a quote

Tell us what you need, we reply within 24 hours.

×

WeChat

17722522312

Same number as our phone. Search it in WeChat to add us, or call 17722522312

LCS

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.

Contact

+86 177 2252 2312
© 2026 LCS Testing Group. All rights reserved.
Scroll to Top