Wall switch (IEC / CE / UKCA)
AS/NZS 60669.2.1 / wall switch
Wall switch (IEC / CE / UKCA)
Wall switch (IEC / CE / UKCA) is tested to AS/NZS 60669.2.1. Three things decide the outcome: whether the configuration and dimensions mate with the destination socket system, whether temperature rise at rated current keeps margin, and whether mechanical strength and clearances survive repeated insertion and abnormal mating.
Regulations and standards
| Regulation / directive / standard | Standards | Scope |
|---|---|---|
| AS/NZS 60669.2.1 scope and configuration | Mechanical and electronic types judged separately | Configuration and dimensions checked against the local standard sheet; a mismatch fails the test |
| Ratings and temperature rise | Terminal and enclosure rise at rated current and voltage | Terminal rise is the most common corrective item |
| Construction | Clearances, creepage, shutters | Accessible live parts fail the test |
| Mechanical strength | Insertion cycles, drop, impact, conductor pull | Run to the required cycles, then repeat the dielectric test |
| Marking and instructions | Ratings, certification mark, wiring instructions | A missing mark can hold the whole shipment |
Main test items
Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.
Samples and documents
- 8–12 samples grouped per test
- Rating and construction drawing with key dimensions
- Material list and plastic grades
- Label and manual artwork
Lead time and deliverables
2–3 weeks for the report; a change of configuration or material requires re-assessment.
Test report, configuration and dimension checklist, temperature-rise and construction notes.
Inquiry / Request a quote
Tell us what you need, we reply within 24 hours.
17722522312
Same number as our phone. Search it in WeChat to add us, or call 17722522312

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.
Contact
+86 177 2252 2312- sunny.lcs@powcert.com
- Juji Industrial Park, Shajing, Bao'an District, Shenzhen, China