LCS TESTING LAB

Temperature sensing control (IEC / CE / UKCA)

AS/NZS 60730.1 / temperature sensing control

Temperature sensing control (IEC / CE / UKCA)

Temperature sensing control (IEC / CE / UKCA) is tested to AS/NZS 60730.1. Three things decide the outcome: whether the configuration and dimensions mate with the destination socket system, whether temperature rise at rated current keeps margin, and whether mechanical strength and clearances survive repeated insertion and abnormal mating.

Key point: Confirm the destination plug and socket configuration and ratings first; a report on the wrong configuration cannot be listed.
Lead time
2–3 weeks
Sample quantity
8–12 pcs grouped per test
Test items
9 items
Deliverables
Report + checklist
STANDARDS

Regulations and standards

Regulation / directive / standardStandardsScope
AS/NZS 60730.1 scope and configurationMechanical and electronic types judged separatelyConfiguration and dimensions checked against the local standard sheet; a mismatch fails the test
Ratings and temperature riseTerminal and enclosure rise at rated current and voltageTerminal rise is the most common corrective item
ConstructionClearances, creepage, shuttersAccessible live parts fail the test
Mechanical strengthInsertion cycles, drop, impact, conductor pullRun to the required cycles, then repeat the dielectric test
Marking and instructionsRatings, certification mark, wiring instructionsA missing mark can hold the whole shipment
TESTS

Main test items

Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.

01
Configuration and mating check
02
Terminal and enclosure temperature rise at rated current
03
Dielectric strength and insulation resistance
04
Insertion cycles to the required count
05
Conductor pull and flexing
06
Drop and impact as required
07
Marking, instructions and packaging review
08
Re-test of temperature rise and dielectric after corrective action
09
Pre-shipment sampling and packaging consistency
Not sure which of the 8 test items apply to your model? Send the datasheet, rating-label photo and where the report will be used — an engineer replies within 24 hours with the applicable item list and a schedule. Talk to an engineer →
SAMPLES

Samples and documents

  • 8–12 samples grouped per test
  • Rating and construction drawing with key dimensions
  • Material list and plastic grades
  • Label and manual artwork
LEAD TIME

Lead time and deliverables

2–3 weeks for the report; a change of configuration or material requires re-assessment.

Test report, configuration and dimension checklist, temperature-rise and construction notes.

For shipping or tender deadlines we can run safety first and follow with EMC and efficiency in a second batch; for an updated model in the same series an existing report can be reused with only the differences retested.
Request a quote and plan

Inquiry / Request a quote

Tell us what you need, we reply within 24 hours.

×

WeChat

17722522312

Same number as our phone. Search it in WeChat to add us, or call 17722522312

LCS

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.

Contact

+86 177 2252 2312
© 2026 LCS Testing Group. All rights reserved.
Scroll to Top