Plug (IEC)
IEC/EN 60884-1 / plug
Plug (IEC)
LCS tests power plugs to IEC/EN 60884-1: pin size, contact, temperature rise and flame resistance; CB reports support multi-market certification.
Regulations and standards
| Regulation / directive / standard | Standards | Scope |
|---|---|---|
| IEC/EN 60884-1 scope and configuration | CEE 7 system | Configuration and dimensions checked against the local standard sheet; a mismatch fails the test |
| Ratings and temperature rise | Terminal and enclosure rise at rated current and voltage | Terminal rise is the most common corrective item |
| Construction | Clearances, creepage, shutters | Accessible live parts fail the test |
| Mechanical strength | Insertion cycles, drop, impact, conductor pull | Run to the required cycles, then repeat the dielectric test |
| Marking and instructions | Ratings, certification mark, wiring instructions | A missing mark can hold the whole shipment |
Main test items
Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.
Samples and documents
- 8–12 samples grouped per test
- Rating and construction drawing with key dimensions
- Material list and plastic grades
- Label and manual artwork
Lead time and deliverables
2–3 weeks for the report; a change of configuration or material requires re-assessment.
Test report, configuration and dimension checklist, temperature-rise and construction notes.
Inquiry / Request a quote
Tell us what you need, we reply within 24 hours.
17722522312
Same number as our phone. Search it in WeChat to add us, or call 17722522312

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.
Contact
+86 177 2252 2312- sunny.lcs@powcert.com
- Juji Industrial Park, Shajing, Bao'an District, Shenzhen, China