Lithium battery UN38.3 transport testing
UN 38.3 T1–T8 / MSDS / sea and air transport statements
Lithium battery UN38.3 transport testing
UN 38.3 is the gate for any lithium battery that ships: cells, packs, batteries packed with equipment and batteries shipped alone all need the eight tests T1–T8 of section 38.3 of the UN Recommendations, followed by a transport-condition statement issued by a recognised body, which is what carriers actually accept. For shipments to international schemes the report is also part of dangerous-goods declaration, packaging certification and customs paperwork; a change of model, cell chemistry or protection-board design requires a fresh assessment of which tests must be repeated.
Regulations and standards
| Regulation / directive / standard | Standards | Scope |
|---|---|---|
| UN 38.3 section 38.3, tests T1–T8 | Altitude simulation, thermal cycling, vibration, shock, external short circuit, impact/crush, overcharge, forced discharge | Judged separately for cells and packs; any failure needs rework and re-testing |
| Separate cell and pack reports | Cell report plus pack report | The pack report references a cell report of the same chemistry; a cell supplier change requires a new cell report |
| Mode of transport | Air / sea / road | Statements are usually issued per mode, together with MSDS and the 1.2 m drop test |
| MSDS (SDS) | 16 sections in GHS format | Combined with the UN38.3 report this forms the package carriers accept |
| Packaging and marking | Dangerous-goods packaging certificate, UN number, lithium battery mark | Check marks and labels against the packing category; a missing item is grounds for refusal |
Main test items
Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.
Samples and documents
- 20 cells and 8 packs (grouped per test; some items need same-batch samples)
- Cell datasheet, BOM and protection-board schematic
- Rating label and packaging label artwork
- Existing MSDS or material composition list
- Intended mode(s) of transport
Lead time and deliverables
UN38.3 report and transport statement are normally issued in 8 safety tests; 15–25 working days; adding MSDS or the 1.2 m drop test extends the schedule by 3–5 working days.
UN38.3 test report, transport-condition statement, MSDS where required, and a packaging/marking review note.
Inquiry / Request a quote
Tell us what you need, we reply within 24 hours.
17722522312
Same number as our phone. Search it in WeChat to add us, or call 17722522312

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.
Contact
+86 177 2252 2312- sunny.lcs@powcert.com
- Juji Industrial Park, Shajing, Bao'an District, Shenzhen, China