LCS TESTING LAB

Lithium battery MSDS / SDS

GHS 16 sections / bilingual / for transport and customs

Lithium battery MSDS / SDS

The MSDS (now usually SDS) is the basic document for shipping lithium batteries: 16 GHS sections covering composition, hazards, first aid, fire fighting, spill handling, transport information and regulations. Carriers and customs brokers normally accept the SDS together with the UN38.3 report, and either missing document can cause rejection. For shipments to international schemes the language version, local regulatory entries and label consistency are checked as well.

Key point: Confirm the destination market, how the report will be used and the shipping or customs milestone first; one report usually serves several markets, with national differences scoped separately.
Lead time
preparation+review; 3–7 working days
Sample quantity
2–3 units
Test items
6 items
Deliverables
Reports + declarations
STANDARDS

Regulations and standards

Regulation / directive / standardStandardsScope
GHS drafting rulesUN GHS rev. 9 / EU CLP (EC) 1272/2008Composition, classification and label elements follow the current revision
Sections 1–3Identification, hazard overview, compositionCAS numbers and content ranges must match the BOM
Sections 4–8First aid, fire fighting, spill handling, handling and storageThermal-runaway and electrolyte-spill steps must be realistic
Sections 9–12Physical properties, stability, toxicology, ecologyWhere data is missing, state the basis of the estimate rather than inventing values
Sections 13–16Disposal, transport information, regulations, otherTransport data must agree with the UN38.3 report and UN number
TESTS

Main test items

Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.

01
BOM, material composition and content review
02
Hazard classification under GHS rules
03
Drafting all 16 sections in Chinese and English
04
Cross-check against the existing UN38.3 report and packaging marks
05
Label element validation (pictograms, signal word, H and P statements)
06
Adding destination entries such as EU CLP or US HCS
Not sure which of the 6 test items apply to your model? Send the datasheet, rating-label photo and where the report will be used — an engineer replies within 24 hours with the applicable item list and a schedule. Talk to an engineer →
SAMPLES

Samples and documents

  • Cell and pack datasheets with BOM
  • Material composition list with CAS numbers
  • Existing UN38.3 report
  • Product and packaging label artwork
  • Destination markets and modes of transport
LEAD TIME

Lead time and deliverables

preparation+review; 3–7 working days for drafting and review; each additional language or regulatory regime adds 1–2 working days.

Final bilingual MSDS / SDS in editable form, a label-element checklist and a consistency note against the UN38.3 report.

For shipping or tender deadlines we can run safety first and follow with EMC and efficiency in a second batch; for an updated model in the same series an existing report can be reused with only the differences retested.
Request a quote and plan

Inquiry / Request a quote

Tell us what you need, we reply within 24 hours.

×

WeChat

17722522312

Same number as our phone. Search it in WeChat to add us, or call 17722522312

LCS

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.

Contact

+86 177 2252 2312
© 2026 LCS Testing Group. All rights reserved.
Scroll to Top