LCS TESTING LAB

Lithium battery IEC/EN 62133 safety testing

IEC 62133-2 / EN 62133-2 / cells and packs

Lithium battery IEC/EN 62133 safety testing

IEC 62133-2 is the common safety standard for rechargeable lithium cells and the basis for most national conversions: the EU assesses to EN 62133-2, while Korea, Japan, India, Taiwan and Australia usually convert from a CB certificate. Testing runs at two levels — cells for design margin and packs for protection-circuit behaviour under abuse. For international schemes projects it is normally scheduled alongside UN38.3 and whole-unit safety (62368-1) so samples are not shipped twice.

Key point: Confirm the destination market, how the report will be used and the shipping or customs milestone first; one report usually serves several markets, with national differences scoped separately.
Lead time
10–15 working days
Sample quantity
2–3 units
Test items
6 items
Deliverables
Reports + declarations
STANDARDS

Regulations and standards

Regulation / directive / standardStandardsScope
IEC 62133-2:2017 + AMD1:2021Safety of rechargeable lithium cells and packsClauses judged separately for cells (7.2 / 7.3) and packs (7.3)
EN 62133-2EU harmonised standardPairs with CE-LVD; the report supports the DoC technical file
Cell clausesOvercharge, forced discharge, external short circuit, crush, drop, thermal abuse, low pressureSample counts scale with cell size and energy
Pack clausesOvercharge protection, external short circuit, drop, thermal cycling, vibrationIncludes protection-circuit failure and single-fault conditions
Relation to other standardsIEC 62619 / UL 2054 / GB 3124162133 does not replace the destination's national differences
TESTS

Main test items

Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.

01
Cell continuous low-rate charging (7.2.1)
02
Cell forced discharge (7.2.2)
03
Cell external short circuit (7.2.3, ambient and 55 °C)
04
Cell crush, impact, drop, thermal abuse, low pressure
05
Pack overcharge protection and external short circuit
06
Pack drop, thermal cycling, vibration and marking review
Not sure which of the 6 test items apply to your model? Send the datasheet, rating-label photo and where the report will be used — an engineer replies within 24 hours with the applicable item list and a schedule. Talk to an engineer →
SAMPLES

Samples and documents

  • 10 cells and 8 packs including protection boards
  • Cell datasheet, BOM and protection-board parameters
  • Unit manual and rating label
  • Existing CB certificate or report when converting
LEAD TIME

Lead time and deliverables

10–15 working days for the report; cell and pack testing can run in parallel, and difference-only testing takes 5–7 working days.

IEC/EN 62133-2 test report, critical-component and protection-parameter checklist, and a national-difference note for conversion.

For shipping or tender deadlines we can run safety first and follow with EMC and efficiency in a second batch; for an updated model in the same series an existing report can be reused with only the differences retested.
Request a quote and plan

Inquiry / Request a quote

Tell us what you need, we reply within 24 hours.

×

WeChat

17722522312

Same number as our phone. Search it in WeChat to add us, or call 17722522312

LCS

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.

Contact

+86 177 2252 2312
© 2026 LCS Testing Group. All rights reserved.
Scroll to Top