LCS TESTING LAB

Lithium battery IEC 61960 performance testing

Capacity / cycle life / charge retention / internal resistance

Lithium battery IEC 61960 performance testing

IEC 61960 covers performance, not safety: whether rated capacity is met, capacity retention after a number of cycles, charge retention and recovery after long storage, and internal-resistance drift. Buyers and marketplaces use it to substantiate runtime claims — a unit sold as 1000 Wh that delivers 850 Wh invites returns and complaints in international schemes. Testing follows the standard's charge/discharge rates and ambient conditions, and the report can be used directly for product-page specifications.

Key point: Confirm the destination market, how the report will be used and the shipping or customs milestone first; one report usually serves several markets, with national differences scoped separately.
Lead time
10–15 working days
Sample quantity
2–3 units
Test items
6 items
Deliverables
Reports + declarations
STANDARDS

Regulations and standards

Regulation / directive / standardStandardsScope
IEC 61960-3Performance of portable lithium secondary cells and batteriesCapacity, cycle life, charge retention, internal resistance and rate capability
Rated capacity0.2 ItA discharge to cut-offMeasured capacity against the declared value using the standard tolerance
Cycle lifeCycling to the capacity-fade threshold100 / 300 / 500 cycles optional; more cycles means a longer schedule
Charge retention28 days storage at ambient and elevated temperatureBoth residual and recovered capacity are recorded
Internal resistance and rateAC resistance and discharge curves at several ratesShows real behaviour under fast charging and high load
TESTS

Main test items

Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.

01
Rated capacity at 0.2 ItA, three runs to stabilise
02
High-rate capacity at 1 ItA
03
28-day charge retention and recovery at ambient
04
28-day charge retention at 45 °C
05
Cycle life at the agreed cycle count, logged every 50 cycles
06
AC and DC internal resistance measurement
Not sure which of the 6 test items apply to your model? Send the datasheet, rating-label photo and where the report will be used — an engineer replies within 24 hours with the applicable item list and a schedule. Talk to an engineer →
SAMPLES

Samples and documents

  • 10 cells and 5 packs
  • Declared capacity, voltage and energy ratings
  • BMS charge/discharge strategy and cut-off conditions
  • Existing cycle data, which can shorten the schedule
LEAD TIME

Lead time and deliverables

10–15 working days; with 500 cycles the schedule follows actual cycling time, typically 4–8 weeks.

IEC 61960 performance report, capacity and cycle-curve data sheets, and a specification summary usable on the product page.

For shipping or tender deadlines we can run safety first and follow with EMC and efficiency in a second batch; for an updated model in the same series an existing report can be reused with only the differences retested.
Request a quote and plan

Inquiry / Request a quote

Tell us what you need, we reply within 24 hours.

×

WeChat

17722522312

Same number as our phone. Search it in WeChat to add us, or call 17722522312

LCS

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.

Contact

+86 177 2252 2312
© 2026 LCS Testing Group. All rights reserved.
Scroll to Top