LCS TESTING LAB

Ghana COC pre-shipment certificate of conformity safety testing (destination markets)

GSA applicable standards + IEC 62133 / construction, temperature rise, insulation, abnormal operation

Ghana COC pre-shipment certificate of conformity safety testing (destination markets)

The unit safety report is the first document buyers and channels in destination markets ask for: whether construction complies, whether temperature rise and insulation keep margin, and whether protection acts under abnormal conditions. Testing follows GSA applicable standards + IEC 62133 and the report normally ships with EMC and battery reports. Models on one platform can be covered as a series, but changes in critical components or ratings need re-assessment.

Key point: Confirm the destination’s acceptance rules and how the report will be used first; one report often serves several markets, with differences scoped separately.
Lead time
5–10 working days
Sample quantity
3 units plus 3 power boards
Test items
7 items
Deliverables
Reports + declarations
STANDARDS

Regulations and standards

Regulation / directive / standardStandardsScope
GSA applicable standards + IEC 62133 construction and markingEnclosure, openings, insulation distances, rating labelProtection judged by energy source class
Temperature rise and abnormal operationFull load, locked rotor, continuous discharge, fan blockageWinding and enclosure rise must stay within limits
Insulation and dielectricDielectric strength, insulation resistance, leakage currentRun per port and insulation class
Mechanical and stabilityImpact, drop, crush, stabilityCracked enclosure or displaced internals fails the test
Critical componentsFuses, transformers, optocouplers, relaysEach needs a certificate to its own standard
TESTS

Main test items

Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.

01
Construction check and rating-label review
02
Temperature rise at full load and abnormal conditions
03
Dielectric strength and insulation resistance
04
Leakage current, normal and single-fault
05
Enclosure impact, drop and stability
06
Critical-component certificate review
07
Marking and warning review
Not sure which of the 7 test items apply to your model? Send the datasheet, rating-label photo and where the report will be used — an engineer replies within 24 hours with the applicable item list and a schedule. Talk to an engineer →
SAMPLES

Samples and documents

  • 3 units plus 3 power boards
  • Schematic, BOM and critical-component certificates
  • Rating label and manual
  • Transformer and inductor datasheets
  • Firmware version and protection parameter table
LEAD TIME

Lead time and deliverables

5–10 working days for the report; re-testing after corrective action adds 1–2 weeks.

Unit safety test report, critical-component checklist and construction/marking improvement notes.

For shipping or tender deadlines we can run safety first and follow with EMC and efficiency in a second batch; for an updated model in the same series an existing report can be reused with only the differences retested.
Request a quote and plan

Inquiry / Request a quote

Tell us what you need, we reply within 24 hours.

×

WeChat

17722522312

Same number as our phone. Search it in WeChat to add us, or call 17722522312

LCS

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.

Contact

+86 177 2252 2312
© 2026 LCS Testing Group. All rights reserved.
Scroll to Top