LCS TESTING LAB

1.2 m free-fall drop test (packaging and cells)

ISTA / UN 38.3 packaging / six faces, three edges, one corner

1.2 m free-fall drop test (packaging and cells)

The drop test is the most easily overlooked transport requirement: after a fall, whether cells shift, the enclosure cracks or the protection board fails decides carrier acceptance and the condition goods arrive in. UN 38.3 and most carriers call for a 1.2 m drop; for shipments to international schemes it is usually packaged with UN38.3 and the MSDS into one document set.

Key point: Confirm the destination market, how the report will be used and the shipping or customs milestone first; one report usually serves several markets, with national differences scoped separately.
Lead time
3–5 working days
Sample quantity
2–3 units
Test items
6 items
Deliverables
Reports + declarations
STANDARDS

Regulations and standards

Regulation / directive / standardStandardsScope
UN 38.3 packaging requirement1.2 m free fall, three drops on the same packageNo cell damage, electrolyte leakage or short circuit inside or outside the package
ISTA 1A / 2ACombined drop and vibration of the packaged itemCommon for e-commerce and courier channels; can be scheduled with the 1.2 m drop
Faces testedBottom, top, four sides, three edges and one cornerExecuted in the standard order with the condition after each drop recorded
Acceptance pointsCell displacement, enclosure cracks, BMS failure, insulation resistanceAny anomaly means packaging rework and re-testing
Relation to other itemsUN38.3 / MSDS / dangerous-goods packaging certificateThe three are usually handled together; carriers need the complete set
TESTS

Main test items

Each item below is run against the standard listed above with raw data recorded on site; the report gives measured values and a pass/fail verdict per item, and one re-test after corrective action is included.

01
Pre-check of package appearance and marks
02
1.2 m drop: bottom and top faces
03
1.2 m drop: four side faces
04
1.2 m drop: three edges
05
1.2 m drop: one corner
06
Post-drop teardown: cell displacement, enclosure, protection board and insulation
Not sure which of the 6 test items apply to your model? Send the datasheet, rating-label photo and where the report will be used — an engineer replies within 24 hours with the applicable item list and a schedule. Talk to an engineer →
SAMPLES

Samples and documents

  • Three complete packages including inserts, manual and accessories
  • Packaging structure drawing and material list
  • Product weight and fragility data
  • Intended transport mode (air, sea or courier)
LEAD TIME

Lead time and deliverables

3–5 working days for the report; adding ISTA vibration extends the schedule by 2–3 working days.

1.2 m drop test report, post-drop inspection record and packaging improvement notes.

For shipping or tender deadlines we can run safety first and follow with EMC and efficiency in a second batch; for an updated model in the same series an existing report can be reused with only the differences retested.
Request a quote and plan

Inquiry / Request a quote

Tell us what you need, we reply within 24 hours.

×

WeChat

17722522312

Same number as our phone. Search it in WeChat to add us, or call 17722522312

LCS

One-stop testing and certification for ESS and lithium batteries — UN38.3, IEC 62619, CE, UL, FCC and more.

Contact

+86 177 2252 2312
© 2026 LCS Testing Group. All rights reserved.
Scroll to Top